LUMINEX GigaCore 30i 10GB (dual 100W PSU)

Key Features

• Most suitable applications: Fixed installations
• PoE: PoE ++
• RLinkX (Link redundancy): Yes
• Groups (VLAN segmentation): Yes
• MultiLinkX (Link aggregation): Yes (With future FW upgrade)
• Profile manager: Yes
• Memory: Flash 1Gb RAM – 8Mb NOR flash 4Gb EMMC storage
• MAC address table: 16384 entries
• Address learning / Aging: Self learning, Auto aging
• Switching throughput: 168 Gb/s
• Jumbo frames: MTU up to 12000
• IGMP support: Yes (V1/V2/V3)
• IGMP snooping: Yes, enabled by default
• Port sensing: Auto negotiation
• Auto crossover: MDI / MDIX
• Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)

10 Gb Connectivity

10Gb connectivity allows full network convergence of lighting control, audio, intercom, and compressed video.

PoE++

• PoE++ implementation on every copper port allows you to connect any PoE device available today.
• Today’s PoE standards (802.3af, 802.3at and 802.3bt) are all met. GigaCore 30i can directly drive almost any IP PTZ camera, network node or PoE powered loudspeaker on the market.

AV Validated for Real Applications

• GigaCore switches are fully validated in real-world applications with major brands in the AV industry for different protocols, including NDI, Dante, AES67, ST-2110, IPMX, MA-Net, and many more. (AVB/MILAN supported in future firmware)
• We don't just approve against a protocol but actually test it. Because of real world application validation and interoperability testing, we understand the applications and make sure you can deploy our product with confidence.
• Luminex support team really speaks your language and has a vast amount of AV knowledge built up, not just from talking protocols but mainly from working with you and living through your real application network challenges.

 

Robust Yet Silent Design

• A robust yet silent design allows you to use GigaCore in any AV environment.
• Fans are speed controlled to have minimal noise impact and guarantee a long-life operation. This allows you to place the GigaCore in the most quiet environments like theaters and studios.

 

Araneo to Manage and Monitor the Complete System

• All GigaCore switches can be managed with a single network-wide tool: Araneo
• Araneo’s online mode shows everything you need to know about the status of your GigaCore network. Data streams and topology are visualized as are the port status of every GigaCore.
• Monitor your network with confidence and act before the show gets interrupted!
• In offline mode, Araneo lets you plan the complete network topology and GigaCore settings in advance. Reducing network commissioning time to a mere click of a button.

Intuitive Web UI

The built-in web UI allows you to adjust the settings in an intuitive way. Assigning Groups (VLANS) to ports, creating trunks or adjusting other port- and PoE settings can be done on the fly and the status page gives you an overview of the complete switch at a glance. The toolbox page allows management of profiles and lets you upgrade firmware easily.

Consistent LED Colors

Consistent Group (VLAN) colors in the web UI, in Araneo, and on the front panel LED's.

Power Over Ethernet

Standards

• 802.3af
• 802.3at
• 802.3bt

PoE Ports

• 802.3af, 802.3at, 802.3bt
• On ports 1-24

Total PoE power budget 500 W (1x slide in PSU)

• 1000 W (2x slide in PSU)
• LLDP Support Yes

Power Allocation (User Configurable)

• Priority per port
• Consumption vs Class/LLDP based

Power Limit

• Total power budget firmware limit – port shutdown at overload based on port priority
• Per port hardware and firmware power limits based on classification – port shutdown at overload

Switch Features

• Boot Time: 45 s
• Redundant Links: Yes
• Group Function: Yes
• Jumbo Frames: Yes, supported up to 12000 MTU (with restrictions when using AVB)

Ethernet Compliance

• IEEE 802.2
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x Flow Control
• IEEE 802.3ab Gigabit Ethernet
• IEEE 802.3af PoE(optional)
• IEEE 802.3at PoE+(optional)
• IEEE 802.3bt PoE++ 90W(optional)
• IEEE 802.1p CoS
• IEEE 802.1d Spanning Tree
• IEEE 802.1w Rapid Spanning Tree
• IEEE 802.1s Multiple Spanning Tree
• IEEE 802.1Q VLAN
• IEEE 802.1ab LLDP
• IEEE 1588-2008 PTPv2

Supported protocols

• Avnu AVB/Milan (Available in future FW update)
• Dante
• RAVENNA/AES67
• Ethersound
• Q-SYS/Q-LAN
• sACN
• ArtNet
• MANet
• HogNet
• RTTrPL (BlackTrax)
• Audio Protocol Compliance: Yes, low jitter and hardware timestamping (IEEE 1588-2008)
• Ethernet Switch Type: Full non- blocking wire-speed switching performance
• Mac Address Table: 16384 entries
• Address Learning / Aging: Self learning, Auto aging
• Switching Throughput: 168 Gb/s (10 Gb/s versions)
• IGMP Querrier: Yes (V1|V2) (V3 compatible)
• IGMP Snooping: Yes, enabled by default (V1|V2|V3)